Electric pump works connected to a 12V-15A outlet and provides up to 15 PSI (1 bar) of pressure on demand. Can be used to effortlessly inflate low-pressure kayaks and high-pressure SUP boards.
Design benefits
ease of use
Set the pressure, start the pump.
parameter measurement
Built-in 0-15 psi pressure gauge.
lightweight
Weight: 1.2 kg.
power
Inflates a 300 L SUP to 15 PSI in approximately 12 minutes.
Design details
Connection
Works plugged into a 12V cigarette lighter socket.
WARNING: The car battery must provide at minimum 15A.
Provides pressure of up to 15 PSI (1 bar).
Enables you to inflate low-pressure kayaks (1 to 2 PSI) and stand-up paddle boards (10 to 15 PSI).
SAFETY CONTROL
Make sure that the cigarette lighter plug is fully pushed in to avoid overheating caused by bad electrical contact.
Operation
1/ Connect the pump to the cigar lighter with the car engine running.
2/ Connect the pump hose to the SUP
3/ Select the psi/bar/hpa mode with the arrow button
3/ Pre-set the recommended pressure with the +/- buttons
4/ Start Press ON to inflate.
The pump stops at the set pressure.